The MENRED MGC series is a DC inverter air source heat pump range with heating capacities from 10 kW to 44 kW. Designed for hydronic heating and cooling systems, the series combines variable-speed compressor control with EVI technology to provide stable and efficient operation across varying building loads and outdoor conditions.
The system is suitable for residential and light commercial HVAC applications, including underfloor heating, fan coil systems and other water-based heating and cooling installations.
DC inverter control allows the compressor to adjust its operating capacity according to the actual heating or cooling demand. Instead of operating continuously at maximum output, the heat pump can modulate its capacity as the building load changes.
This variable-speed operation helps improve part-load efficiency, maintain more stable water temperatures and reduce unnecessary compressor cycling while also supporting quieter operation.
Enhanced Vapor Injection (EVI) technology is designed to support more stable compressor performance when outdoor temperatures fall. By improving the refrigerant cycle under demanding heating conditions, EVI helps the heat pump maintain useful heating capacity in colder climates.
Combined with DC inverter control, the MGC series can respond to changing outdoor temperatures and system loads while maintaining efficient hydronic heating operation.
The MENRED MGC series uses a water-side heat exchanger and is designed to integrate with hydronic heating and cooling systems.
Typical applications include:
The MGC series covers heating capacities from approximately 10 kW to 44 kW, allowing system designers, contractors and distributors to select a suitable model according to project heating and cooling loads.
Heat pump selection should be based on the actual building load, local design temperature, water temperature requirement, terminal system and operating conditions rather than nominal capacity alone.
MENRED heat pumps can be integrated with hydronic heating controls, thermostats, manifolds, PE-RT pipe systems and ventilation equipment to create a coordinated indoor climate solution.
Explore MENRED Thermostats and Ventilation Systems for integrated HVAC project applications.
| Item | Specification |
|---|---|
| Series | MENRED MGC Series |
| Heat pump type | DC inverter air source heat pump |
| Heating capacity range | 10–44 kW |
| Compressor control | DC inverter |
| Low-temperature technology | EVI (Enhanced Vapor Injection) |
| Operating mode | Hydronic heating and cooling |
| Typical applications | Underfloor heating, fan coil systems, radiant heating and light commercial HVAC |
The MGC Series covers heating capacities from 10 kW to 44 kW. Select a model according to the building load and project design conditions.
Yes. The MGC Series is designed for hydronic heating and cooling systems.
It can integrate with hydronic underfloor heating, fan coil heating and cooling, radiant heating and other water-based HVAC systems.
EVI, or Enhanced Vapor Injection, is designed to support compressor performance in colder outdoor conditions and help maintain useful heating capacity.
The product range is presented for low-ambient operation down to -35°C. Exact operating limits and heating output depend on the selected model and operating conditions. Check the relevant model data for project selection.
Consider the building heating and cooling load, local design temperature, required water temperature, terminal system and operating conditions. Nominal capacity alone is not enough to determine the right model.
Share your project location, building area, design temperature, heating and cooling load, water temperature and terminal system. MENRED can help recommend a suitable MGC heat pump model and system configuration.
Request Heat Pump Selection
Since its inception in 1995, Zhejiang Menred Comfort System Co., Ltd., affectionately known as Menred, has firmly established itself as a beacon of innovation and excellence in the global manufacturing industry. Specializing in 'radiant heating and cooling, ventilation, water purification, and smart home' systems, Menred is not only a trusted partner of the National Key Laboratory of 'Future Building' but also proudly serves as a certified factory for Electrolux AB, a leading name in the global appliance arena. At 'MENRED Comfort Home', we have ambitiously evolved from mere temperature control solutions to comprehensive systematic air conditioning systems. Our focus is not just on cost-effective solutions but on pioneering energy efficiency, putting the user's needs at the heart of our product development. Our passion extends to creating sublime comfort home product solutions, spearheading the innovative development of green building equipment, and delving into the engineering application and research of Building Integrated Photovoltaic (BIPV) and energy storage solutions. Within the esteemed Menred group, we proudly house 4 National High-tech Enterprises alongside 3 enterprises recognized for High-quality Technological Advancement. These enterprises have not only been conferred with the prestigious national title of Technologically Advanced Little Giant' but also have been distinguished as Service Oriented Manufacturing Demonstration Enterprises, signifying our commitment to excellence and innovation.
